Shop Applications About us Support & feedback Product literature Blog FAQ Careers Contact
Measurement technologies
Oval GearHelical RotorPlastic HelicalTurbineElectromagneticVortexSwirlThermal MassFuel Consumption MeterVehicle Fuel Management
Policies
Terms & ConditionsTrademarkShipping PolicyPrivacy PolicyBilling TermsCancellation PolicyRefund & Returns
Get a quote Call us

Your Cart

Subtotal₹0
Proceed to Checkout →
Oval Gear Flow Sensor & Meter — real BROIL product photograph
POSITIVE DISPLACEMENT — POSITIVE DISPLACEMENT METER

Oval Gear Flow Sensor & Meter

Two rotors turn. Every drop is counted.

BROIL's industrial positive displacement flow meter utilizes specially designed oval rotors at its core, ensuring high accuracy and long life. These field-proven oval rotors excel in measuring a wide range of high-viscosity fluids, making the meter suitable for diverse industrial applications.

Enclosure
Aluminum / SS-304 / SS-316 / Cast Iron
Rotor
Aluminum / SS-316 / PPS
Shaft
Hard SS-316
Repeatability
0.01%
Where it is used

Markets & areas of application

Light and heavy fuel oils, hydraulics test rigs with varying viscosities and fluids — an excellent choice for laminating systems, painting systems, adhesive dispense systems, and batching systems. Aluminum wetted parts suit kerosene, gasoline, diesel, light and heavy oil. Stainless steel wetted parts suit wine, beer, alcohol, milk and food liquid. PPS wetted parts suit chemical and pharma drug applications.

Click any industry to see the full product list for it, or tell us your process and we will confirm the match.

Why choose it

Advantages

✓Wide range of design options with different output
✓Long life with high accuracy and repeatability
✓Flow range from 0.5 L/H to 1,50,000 L/H
✓Rated to 300 Bar working pressure
✓Pulsation-free measurement, unaffected by pulsating flow
✓Corrosion-resistant materials and bearings for a long service life
✓Aluminum, stainless steel or PPS wetted parts to match your fluid
Build & specification

General Specification

Enclosure
Aluminum / SS-304 / SS-316 / Cast Iron
Rotor
Aluminum / SS-316 / PPS
Shaft
Hard SS-316
Repeatability
0.01%
Accuracy (standard position)
±0.5% Rs / 0.15% FSD
Maximum working pressure
5 MPa for Al, 30 MPa for SS
Fluid & ambient temperature
-20° to 150°C
Connection
Thread (F) or Flange
Power voltage
5 / 12 / 24 V DC
Output signal
NPN/PNP Open Collector / Proxy Sensor
High electrical level
Higher than 8 V DC (input 12 VDC)
Low electrical level
Lower than 0.8 V DC (input 12 VDC)
Before you configure

Frequently asked questions

How accurate is the Oval Gear Flow Sensor & Meter?+

Standard-position accuracy is ±0.5% of reading (0.15% FSD), with repeatability of 0.01% — tight enough for custody-style billing on fuels and oils.

What flow range does it cover?+

0.5 L/H to 1,50,000 L/H across the model range (the BT-DOFS series), so the same family covers everything from lab-scale dosing to bulk transfer lines.

What output signal options are available?+

NPN/PNP open-collector or proximity-sensor pulse output as standard, running on 5/12/24 V DC, plus (4–20) mA, programmable pulse, RS-485/HART communication and battery-powered mechanical display options — see General Specification above for the full electrical detail.

Which materials and fluids is it suited to?+

Aluminum-wetted units suit kerosene, gasoline, diesel and light/heavy oil; stainless-steel-wetted units suit wine, beer, alcohol, milk and food liquids; PPS-wetted units suit chemical and pharma drug applications. Maximum working pressure is 5 MPa for aluminum bodies and 30 MPa for stainless steel.

How is this different from the Helical Rotor meter?+

Both are positive-displacement rotor designs. Oval Gear is the higher-accuracy, higher-pressure choice (0.01% repeatability, up to 300 Bar); Helical Rotor is built specifically for applications where the liquid isn't guaranteed pure and a lighter, easier-to-service rotor is preferred.

Do I need a strainer upstream?+

Yes — fit one. The clearance between the gears and the housing is under 0.1 mm, so a piece of weld slag, a stray bolt thread or a stone will jam the rotors or snap a shaft instantly. A 60-mesh strainer suits oils and fuels; use 80-mesh for chemicals. On a newly installed or modified line, flush the pipework completely before the meter ever sees flow — installing without a strainer, or starting up on unflushed pipe, is the single most common cause of oval gear meters failing early.

What happens if air gets into the line?+

The meter measures whatever fills the gear pockets, so entrained air or vapour is counted as if it were liquid — you'll read high. This matters most during tank unloading or after any point the line runs dry. Fit an air eliminator upstream (a large-capacity one, downstream of an air separator tank, if you're moving a high-viscosity fluid) so trapped air is vented before it reaches the gears.

Model range

Choose your model

ModelLine SizeRangeLiter / Pulse
BT-DOFS-0044 mm0.5 ~ 60 L/H0.000363
BT-DOFS-0066 mm5 ~ 150 L/H0.000714
BT-DOFS-0088 mm20 ~ 300 L/H0.00240
BT-DOFS-01212 mm50 ~ 1200 L/H0.00240
BT-DOFS-02020 mm150 ~ 2000 L/H0.0156
BT-DOFS-02525 mm200 ~ 4000 L/H0.0208
BT-DOFS-04040 mm400 ~ 10000 L/H0.1428
BT-DOFS-05050 mm600 ~ 20000 L/H0.1818
BT-DOFS-08080 mm1000 ~ 50000 L/H0.333
BT-DOFS-100100 mm2000 ~ 100000 L/H1.0
BT-DOFS-150150 mm5000 ~ 150000 L/H3.2
Build your unit

Configure it, then get a quote

Choose the options you need. Every selection is included automatically when you send the request — so the price you get back is for the unit you actually want.

Please enter your name.
Please enter a valid email address.
Please enter a phone number.

Goes to info@broiltech.com. An engineer replies within one working day.

Related technology

You might also need

WhatsApp us Call an engineer