Shop Applications About us Support & feedback Product literature Blog FAQ Careers Contact
Measurement technologies
Oval GearHelical RotorPlastic HelicalTurbineElectromagneticVortexSwirlThermal MassFuel Consumption MeterVehicle Fuel Management
Policies
Terms & ConditionsTrademarkShipping PolicyPrivacy PolicyBilling TermsCancellation PolicyRefund & Returns
Get a quote Call us

Your Cart

Subtotal₹0
Proceed to Checkout →
Plastic Helical Rotor Flow Sensor & Meter — real BROIL product photograph
DIGITAL SENSOR — POSITIVE DISPLACEMENT METER (DIGITAL)

Plastic Helical Rotor Flow Sensor & Meter

Same pulse factor, full range, every time.

BROIL developed and produced a plastic helical rotor flow sensor specially for liquid dispensing industries. Where plastic turbine flow sensors suffer a K-factor that changes with flow rate, BROIL's helical rotor plastic flow sensor holds the same pulse K-factor across the full range — delivering very good accuracy and repeatability throughout the measurement range.

Enclosure
Pa66 + GF / PPS
Rotor
Pa66 / POM / PPS
Shaft & ball
Hard SS-316
Repeatability
0.25%
Where it is used

Markets & areas of application

Very good for water ATMs, water dispensing, tea / coffee / wine / juice and other food liquid measurement and dispensing. Also fats and oils with varying viscosities, water / glycol mixtures, and any viscous liquid where viscosity changes with temperature.

Click any industry to see the full product list for it, or tell us your process and we will confirm the match.

Why choose it

Advantages

✓Direct plug-in digital LCD readout with reset/cal buttons
✓Three output sensor options to match your controller
✓Low pressure drop compared with other positive-displacement meters
✓Same pulse K-factor held across the entire flow range
✓Accurate to 2.5 Bar, independent of viscosity from 1 to 106 mm²/s
✓Pulsation-free, non-sensitive to pulsating flow
✓Resistant to corrosion with advanced wetted materials
Build & specification

General Specification

Enclosure
Pa66 + GF / PPS
Rotor
Pa66 / POM / PPS
Shaft & ball
Hard SS-316
Repeatability
0.25%
Accuracy (standard position)
±2% FSD
Maximum working pressure
0.25 MPa
Fluid & ambient temperature
-20° to 80°C
Connection
Thread (M)
A) Hall sensor
5 to 24 V DC, low range 2 to 5 V DC, NPN open collector
B) Reed sensor
Available
C) Pick-up coil
Two-wire / amplified three-wire option
Before you configure

Frequently asked questions

How is this different from the metal Helical Rotor meter?+

Same working principle, but the enclosure and rotor are engineering plastics (PA66+GF/PPS body, PA66/POM/PPS rotor) rather than metal — lighter, corrosion-immune, and suited to water, beverage and dispensing duty rather than heavy industrial fuels.

What's the accuracy and pressure rating?+

±2% FSD accuracy, repeatability 0.25%, rated to 0.25 MPa (2.5 Bar) maximum working pressure, -20° to 80°C.

Does the pulse output stay consistent across the flow range?+

Yes — the same pulse K-factor is held across the entire flow range, so downstream totalizers don't need re-scaling as flow varies.

What output sensor options are there?+

Three: a Hall sensor (5–24 V DC, or 2–5 V DC low range, NPN open collector), a reed sensor, or a pick-up coil in two-wire or amplified three-wire form — pick whichever matches your controller.

What is it best suited to?+

Water ATMs and dispensing, tea/coffee/wine/juice and other food liquid measurement, fats and oils, water/glycol mixtures, and other viscous liquids where viscosity shifts with temperature.

Do I still need a strainer, given it's plastic?+

Yes — if anything, a plastic rotor is less tolerant of a jam than a metal one, since a lodged particle can shear the moulded vanes rather than just scoring metal. Fit a basic inline strainer and flush a new line before the meter sees flow, exactly as you would for the metal Helical Rotor.

Can it run dry?+

Avoid it. The fluid itself lubricates the rotor against the plastic housing, and plastic tolerates frictional heat build-up worse than metal does — running dry for any length of time, even briefly during commissioning, risks warping or scoring the bore. Fill the line and bring it up to flow gradually rather than opening a valve onto an empty meter.

Model range

Choose your model

ModelConnection (M)RangeLiter / Pulse
BT-PHTFS-004¼" BSP40 ~ 400 L/H0.000285
BT-PHTFS-008½" BSP150 ~ 1500 L/H0.001063
BT-PHTFS-012¾" BSP500 ~ 5000 L/H0.004901
BT-PHTFS-0201" BSP800 ~ 8000 L/H0.012195
BT-PHTFS-0251¼" BSP1000 ~ 10000 L/H0.020833
⚠ Never test the flow sensor with compressed air — it will damage the rotor and shaft.
Build your unit

Configure it, then get a quote

Choose the options you need. Every selection is included automatically when you send the request — so the price you get back is for the unit you actually want.

Please enter your name.
Please enter a valid email address.
Please enter a phone number.

Goes to info@broiltech.com. An engineer replies within one working day.

Related technology

You might also need

WhatsApp us Call an engineer