Shop Applications About us Support & feedback Product literature Blog FAQ Careers Contact
Measurement technologies
Oval GearHelical RotorPlastic HelicalTurbineElectromagneticVortexSwirlThermal MassFuel Consumption MeterVehicle Fuel Management
Policies
Terms & ConditionsTrademarkShipping PolicyPrivacy PolicyBilling TermsCancellation PolicyRefund & Returns
Get a quote Call us

Your Cart

Subtotal₹0
Proceed to Checkout →
Turbine Flow Sensor & Meter — real BROIL product photograph
ROTOR VELOCITY — VELOCITY FLOW METER

Turbine Flow Sensor & Meter

The rotor spins with the flow.

Turbine flow meters use the mechanical energy of flowing fluid, causing a rotor to rotate at an angular velocity proportional to the fluid flow rate or velocity within the flow path. Pickup coils capture this angular velocity and generate an electrical signal directly proportional to flow rate.

Flow tube
SS-304 / SS-316 / on request
Rotor
Cd4mCu / SS410 with Teflon coating
Shaft & bush
Hard carbon
Repeatability
0.2%
Where it is used

Markets & areas of application

Used across oil, water and chemical industries, in order of magnitude from largest to smallest — including aerospace, food & beverage, metals & mining, pharmaceutical, power, and pulp & paper.

Click any industry to see the full product list for it, or tell us your process and we will confirm the match.

Why choose it

Advantages

✓Cost-effective, with a long service life even in severe operating environments
✓High accuracy, repeatability and rangeability tailored to specific viscosities and ranges
✓Designed for nonconductive liquids, with heating capability for the measuring device
✓Suitable for very low flow rates
✓Flow range from 0.65 to 15,500 L/min, rated to 300 Bar
✓BSP, NPT, Flanged, Hygienic, Autoclave and Nova Swiss connections
✓Pulse and analogue output, ATEX-compliant for hazardous areas
Build & specification

General Specification

Flow tube
SS-304 / SS-316 / on request
Rotor
Cd4mCu / SS410 with Teflon coating
Shaft & bush
Hard carbon
Repeatability
0.2%
Accuracy (standard position)
±0.5 or 1% FSD
Maximum working pressure
60 Bar / 300 Bar
Fluid & ambient temperature
-20° to 120°~180°C
Connection
Thread (M) / Sandwich Flange / Tc End
Power voltage
5 / 12 / 24 V DC
Output signal
NPN/PNP
High electrical level
Higher than 8 V DC (input 12 VDC)
Low electrical level
Lower than 0.8 V DC (input 12 VDC)
Before you configure

Frequently asked questions

What's the accuracy and flow range?+

±0.5% or 1% FSD accuracy, 0.2% repeatability, 0.65 to 15,500 L/min flow range, rated to 300 Bar.

Can it measure non-conductive liquids?+

Yes — it's specifically designed for nonconductive liquids, with a heating capability available for the measuring device where the fluid needs it.

What connections are available?+

BSP, NPT, Flanged, Hygienic (Tri-Clamp), Autoclave and Nova Swiss connections, alongside thread, sandwich flange or Tc end options.

Is it certified for hazardous areas?+

Yes, ATEX-compliant variants are available, with pulse or analogue output.

What output signal does it give?+

NPN/PNP pulse output at 5/12/24 V DC as standard; see General Specification above for the full electrical detail.

How much straight pipe do I need before and after the meter?+

As a rule of thumb, 10 pipe diameters of straight run upstream and 5 downstream, with nothing closer than that — an elbow, valve or pump right before the meter disturbs the flow profile hitting the rotor and shows up as an erratic or biased reading. If you're tight on space, a flow straightener ahead of the meter is the usual fix; tell us your layout and we'll confirm what you need.

Why would accuracy drift over time?+

Two things, almost always: bearing wear, which adds drag and slows the rotor relative to true flow, and buildup on the rotor blades from sediment or chemical deposits in the fluid, which changes their profile. Both show up as a gradual, not sudden, shift — which is why we recommend checking the reading against a reference periodically rather than only after something seems obviously wrong.

Model range

Choose your model

ModelLine SizeRangeLiter / Pulse
BT-DTFS-0066 mm40 ~ 400 L/H0.000095
BT-DTFS-0099 mm200 ~ 2000 L/H0.000571
BT-DTFS-01212 mm400 ~ 4000 L/H0.001219
BT-DTFS-02020 mm800 ~ 8000 L/H0.002544
BT-DTFS-02525 mm1000 ~ 10000 L/H0.004629
BT-DTFS-03232 mm1500 ~ 15000 L/H0.00740
BT-DTFS-04040 mm2000 ~ 20000 L/H0.01250
BT-DTFS-05050 mm4000 ~ 40000 L/H0.03571
BT-DTFS-08080 mm10000 ~ 100000 L/H0.10752
BT-DTFS-100100 mm20000 ~ 200000 L/H0.23809
BT-DTFS-150150 mm30000 ~ 300000 L/H0.33222
BT-DTFS-200200 mm40000 ~ 400000 L/H0.45454
Build your unit

Configure it, then get a quote

Choose the options you need. Every selection is included automatically when you send the request — so the price you get back is for the unit you actually want.

Please enter your name.
Please enter a valid email address.
Please enter a phone number.

Goes to info@broiltech.com. An engineer replies within one working day.

Related technology

You might also need

WhatsApp us Call an engineer