Shop Applications About us Support & feedback Product literature Blog FAQ Careers Contact
Measurement technologies
Oval GearHelical RotorPlastic HelicalTurbineElectromagneticVortexSwirlThermal MassFuel Consumption MeterVehicle Fuel Management
Policies
Terms & ConditionsTrademarkShipping PolicyPrivacy PolicyBilling TermsCancellation PolicyRefund & Returns
Get a quote Call us

Your Cart

Subtotal₹0
Proceed to Checkout →
Precision Swirl Velocity Flow Meter — real BROIL product photograph
SWIRL PRINCIPLE — VELOCITY FLOW METER

Precision Swirl Velocity Flow Meter

The flow spins. The frequency tells the rate.

Swirl flowmeters, often referred to as swirl meters or precision vortex flowmeters, operate on the principle of imparting angular momentum to the flowing fluid through a set of stationary blades or swirl vanes. As the fluid passes through these vanes it acquires a swirling motion. These swirls are detected by a sensor, and the frequency of their formation is directly proportional to fluid velocity — allowing the meter to accurately calculate the flow rate.

Enclosure
Aluminium / SS316
Rotor
SS316 / Tantalum
Repeatability
0.02%
Accuracy (standard position)
1% for gas
Where it is used

Markets & areas of application

Gas measurement, petroleum, chemical industries, compressed air measurement, and applications with complex flow patterns needing accurate low-flow measurement.

Click any industry to see the full product list for it, or tell us your process and we will confirm the match.

Why choose it

Advantages

✓Operates over a broad range of temperatures and pressures
✓Can directly measure mass flow rates
✓No moving parts in direct contact with the fluid
✓Reduces maintenance requirements
✓Integrates into process control systems for real-time monitoring
✓Covers DN15 to DN200 pipe sizes
✓Flow range from 0.3 to 3,600 m³/h with high accuracy
Build & specification

General Specification

Enclosure
Aluminium / SS316
Rotor
SS316 / Tantalum
Repeatability
0.02%
Accuracy (standard position)
1% for gas
Fluid & ambient temperature
-20°C to 80°C
Connection
Flange End
Before you configure

Frequently asked questions

How is Swirl different from Vortex?+

Both are velocity meters with no moving parts, but Swirl uses a fixed swirl blade rather than a bluff body, which gives it better performance at low flow and in complex flow-pattern applications — Vortex covers a broader liquid/gas/steam range at higher velocities.

What's the accuracy and range?+

1% accuracy for gas, 0.02% repeatability, covering DN15 to DN200 pipe sizes and 0.3 to 3,600 m³/h.

What materials is it available in?+

Aluminium or SS316 enclosure, with SS316 or Tantalum rotor, -20°C to 80°C, flange-end connection.

Can it output mass flow directly?+

Yes — it can directly measure mass flow rates, which is useful where you need mass rather than volumetric readings without adding a separate calculation step.

What's it best suited to?+

Gas measurement, petroleum and chemical industries, compressed air measurement, and applications with complex flow patterns needing accurate low-flow measurement.

Does it need long straight pipe runs, the way vortex meters do?+

Less than a vortex meter typically needs. The fixed swirl blade conditions the flow itself as it enters, which is exactly why this design copes better with disturbed or complex upstream flow patterns than a bare bluff-body vortex meter does. You'll still get the most consistent reading with a reasonable straight run either side — tell us your layout and we'll confirm what's needed for your line size.

Is this a gas-only meter, or does it work on liquid too?+

This model range is specified and rated for gas — air, compressed air, natural gas and process gases in petrochemical duty. If your application is liquid, look at the Vortex or Electromagnetic ranges instead, or tell us the fluid and we'll confirm the right fit.

Model range

Choose your model

ModelLine Size (Flange)Range (m³/H)
BT-SFM-015½"0.33 ~ 12
BT-SFM-020¾"1.1 ~ 16
BT-SFM-0251"2.7 ~ 32
BT-SFM-0321¼"4.6 ~ 61
BT-SFM-0401½"6.5 ~ 73
BT-SFM-0502"11.3 ~ 134
BT-SFM-0652½"19.1 ~ 299
BT-SFM-0803"29.4 ~ 408
BT-SFM-1004"50.9 ~ 792
BT-SFM-1255"70.7 ~ 1016
BT-SFM-1506"159 ~ 2227
BT-SFM-2008"226.2 ~ 3619
Build your unit

Configure it, then get a quote

Choose the options you need. Every selection is included automatically when you send the request — so the price you get back is for the unit you actually want.

Please enter your name.
Please enter a valid email address.
Please enter a phone number.

Goes to info@broiltech.com. An engineer replies within one working day.

Related technology

You might also need

WhatsApp us Call an engineer