Shop Applications About us Support & feedback Product literature Blog FAQ Careers Contact
Measurement technologies
Oval GearHelical RotorPlastic HelicalTurbineElectromagneticVortexSwirlThermal MassFuel Consumption MeterVehicle Fuel Management
Policies
Terms & ConditionsTrademarkShipping PolicyPrivacy PolicyBilling TermsCancellation PolicyRefund & Returns
Get a quote Call us

Your Cart

Subtotal₹0
Proceed to Checkout →
Vortex Velocity Flow Meter — real BROIL product photograph
KARMAN VORTEX — VELOCITY FLOW METER

Vortex Velocity Flow Meter

Vortices form. The rate follows.

Vortex flow meters operate on the von Karman effect, built around a bluff body. As fluid flows past it, alternating vortices form behind the bluff body — detected by a sensor, with the frequency of their formation directly proportional to fluid velocity, letting the meter accurately calculate flow rate.

Enclosure
SS316 / Pa66
Lining
SS316 / PTFE / Pa66
Repeatability
0.2%
Accuracy (standard position)
±0.5 for liquid / 1% for gas
Where it is used

Markets & areas of application

Measurement of hydrocarbons and natural gas flow in pipelines; monitoring flow rates in refineries and petrochemical plants. Gas: air, oxygen, nitrogen, coal gas, natural gas, chemical gas and more. Liquid: high-temperature water, chemical liquid, clean and low-viscosity liquid. Steam: saturated and superheated steam.

Click any industry to see the full product list for it, or tell us your process and we will confirm the match.

Why choose it

Advantages

✓Reliable, cost-effective, accurate solution across diverse industrial processes
✓Robust design and ease of installation
✓Low maintenance requirements
✓One meter family for liquid, gas and steam
✓Liquid 0.5–7 m/s, gas 5–70 m/s, steam 5–80 m/s
✓Rated to 30 Bar and 350°C
✓Suited to hydrocarbon and natural gas pipelines, refineries and petrochemical plants
Build & specification

General Specification

Enclosure
SS316 / Pa66
Lining
SS316 / PTFE / Pa66
Repeatability
0.2%
Accuracy (standard position)
±0.5 for liquid / 1% for gas
Maximum working pressure
30 Bar
Fluid & ambient temperature
-20° to 350°C
Connection
Sandwich / Flange
Before you configure

Frequently asked questions

Can the same meter handle liquid, gas and steam?+

Yes — one meter family covers all three: liquid at 0.5–7 m/s, gas at 5–70 m/s, and steam at 5–80 m/s, rated to 30 Bar and 350°C.

What's the accuracy?+

±0.5% for liquid, 1% for gas, with 0.2% repeatability.

What materials is it available in?+

SS316 or PA66 enclosure, with SS316, PTFE or PA66 lining, for sandwich or flange connection.

What's it best suited to?+

Hydrocarbon and natural gas pipelines, refineries and petrochemical plants, and general gas measurement — air, oxygen, nitrogen, coal gas, natural gas and other chemical gases.

Does it need much maintenance?+

No — it's a robust, easy-to-install design with low maintenance requirements since there's no rotor or moving part in the flow path.

Is there a minimum flow rate below which it stops reading?+

Yes — every vortex meter has a low-flow cutoff, a velocity below which vortices simply don't shed regularly enough to detect, so the output clamps to zero rather than reporting an unreliable number. It's a real physical limit, not a setting we can remove, and it shifts with your fluid's viscosity and density. When you tell us your minimum expected flow alongside the maximum, we size the meter so that minimum sits comfortably above the cutoff rather than in the dead zone.

Does vibration or nearby equipment affect the reading?+

It can — strong pipe or process vibration can register as a signal alongside the real vortex shedding, since both show up as pressure fluctuations at the sensor. Noise-rejection filtering handles moderate cases, though pushing it harder to reject heavy vibration also raises the meter's low-flow cutoff, so it's better solved by proper pipe support and mounting than by filtering alone. Mention any nearby pumps or known vibration sources when you send us your line details.

Model range

Choose your model

ModelWater Flow Range (m³/hr)Air Flow Range (m³/hr)
BT-VTM-0150.36 ~ 5.073.62 ~ 47.05
BT-VTM-0200.57 ~ 7.925.65 ~ 73.51
BT-VTM-0250.81 ~ 11.408.14 ~ 105.86
BT-VTM-0402.04 ~ 28.5820.41 ~ 326.63
BT-VTM-0503.53 ~ 49.4835.34 ~ 565.49
BT-VTM-0807.74 ~ 108.3877.42 ~ 1238.64
BT-VTM-10013.30 ~ 186.22133.02 ~ 2128.27
BT-VTM-15030.13 ~ 421.89301.35 ~ 4821.57
BT-VTM-20056.55 ~ 791.68565.49 ~ 9047.79
BT-VTM-25090.49 ~ 1266.87904.91 ~ 14478.49
BT-VTM-300127.23 ~ 1781.281272.35 ~ 20357.52
Build your unit

Configure it, then get a quote

Choose the options you need. Every selection is included automatically when you send the request — so the price you get back is for the unit you actually want.

Please enter your name.
Please enter a valid email address.
Please enter a phone number.

Goes to info@broiltech.com. An engineer replies within one working day.

Related technology

You might also need

WhatsApp us Call an engineer